Skip to content. | Skip to navigation

You are here: Home / Products / GS-911 / Alpha / alphatest

alphatest

Please read the following carefully...

  • This is a NON-public ALPHA release... it may NOT be distributed or discussed with any outside party.
  • The GUI (Graphical User Interface) is new, and still has some issues - feel free to comment on them, but this is not what we are testing here..
  • These test pertain to three specific categories - models with Service Reminders, and the K1200GT with its Brake-Pad Wear Indicator (all models - with or without service reminders), and all CAN-bus R-Series models for the Idle Actuator Calibration.
  • ALL feedback should be addressed to support@hexcode.co.za and pls add "alpha" or "alpha test" in the subject line (we get a lot of mail and that will make life a lot easier for us.
  • feel free to add screenshots - a picture tells a thousand words
  • pls include the latest .log log file(s) found under your GS-911 install folder (default is C:\Program Files\GS-911 Beta ) – before starting, have a look at the folder and determine the latest (newest) log that already exists – we are only interested in the ones that follow this one…
  • for these specific tests, pls refrain from testing anything else (other functions or other control units) – we’re trying to isolate the tests in the logs and the more “other” tests you run, the more data we need to work through in the logs…

 

 

download

 

download 812.4Alpha here  4.3MB

 

 

known issues

  • you won't be able to access the integral ABS on your 1150 and older (non-CAN) K1200 models
  • no copy/paste in this version
  • this version will expire at the end of January (we should have another version by then)
  • the GUI is still in progress
  • When in imperial mode, setting service reminder distance is 1 less than requested distance

 

 

test reports

Service Reminder Resets:

For all CAN-based R-; K- and F-Series with Service reminders

download the test schedule here  84kB

in Microsoft .doc format, so you can reply in the document and email it back to us at support@hexcode.co.za



Brake-pad Wear Indicator Resetting:

Only for CAN-based K1200GT models 2006+

download the test schedule here  72kB

in Microsoft .doc format, so you can reply in the document and email it back to us at support@hexcode.co.za

Notes for Brake-pad wear indicator:

  • The GT1 states "The brake pad wear indicator goes out only when the motorcycle speed is above 40 km/h and the brakes have been actuated for at least 2 seconds." This as far as we know is the latest "automatic reset" functionality, however we would like to test the diagnostic way of resetting these...

 

Idle Actuator Calibration:

Only for CAN-based R1200-Series (not for R1200C and R1200CL)

download the test schedule here  52kB

in Microsoft .doc format, so you can reply in the document and email it back to us at support@hexcode.co.za

 

 

Distance remaining to next Valve Clearance Check:

For all CAN-based K- and F-Series  - here we only read the value - to get feedback to see if it is still "used" internally to the ECU..

download the test schedule here  52kB

in Microsoft .doc format, so you can reply in the document and email it back to us at support@hexcode.co.za