Skip to content. | Skip to navigation

You are here: Home / Products / GS-911 / BMS-K

BMS-K

BMS-K/KP/KP2 Engine Controller

 

BMS-K/KP/KP2 Functions sub-function
comments
PC / Laptop version
GS-911 Bluetooth 
GS-911 web
ECU information
yes yes yes
Read Fault codes
yes yes yes
Clear Fault codes
yes yes yes
Real-time values
yes yes yes
Log real-time values
yes yes yes
Service Reminder Reset both Distance & Date yes - yes
Idle Actuator Calibration for R, K and F-Series yes - yes
Engine Synchronization R-Series yes - yes
Exhaust flap calibration where fitted yes - yes
Balance-pipe flap calibration S1000RR (K46) yes - yes
Set/Reset Rev limiter (nENG max) S1000RR (K46) (nMOT max) yes - yes
Function Tests
Oxygen sensor signal Lambda control yes - yes

Electric Fan yes - yes

Electric Fuel-pump yes - yes

Tank venting US models only yes - yes

Injectors 1,2 R- & F-Series yes - yes

Injectors 1,2,3,4 K-Series yes - yes

Injectors 1,2,3,4,5,6,7,8 S-Series yes - yes

Idle Actuator, Cylinder 1 R-Series yes - yes

Idle Actuator, Cylinder 2 R-Series yes - yes

Idle Actuator F- & K-Series yes - yes

Idle actuator for full load stop K-Series only yes - yes

Electronic Throttle valve S1000RR (K46) drive-by-wire future - future

Oxygen sensor 1 heating R-Series and S-Series yes - yes

Oxygen sensor 2 heating R-Series and S-Series yes - yes

Oxygen sensor heating F- & K-Series yes - yes

secondary air valve where fitted yes - yes

acoustic flap where fitted (Japan) future - future

exhaust flap where fitted yes - yes

Balance-pipe S1000RR (K46) yes - yes

DISA (Differentiated Intake System) S1000RR (K46) future - future

warning indicator - Engine Temp. yes - yes

Warning indicator - Check Engine yes - yes
Adaptation values Reset adaptation values completely yes - yes

Check adaptation values and re-register R-Series yes - yes

Check adaptation values and re-register K-Series yes - yes

Check adaptation values and re-register F-Series yes - yes

Check adaptation values and re-register S-Series yes - yes
Over Rev information
MaxRPM, odo at last event, number of over rev events future - future
Over revving detail
time in ranges above 9000rpm future - future
Read Automatic Stability Control (ASC)
future - future
EWS functions
View Key Status yes - yes

Disable Key after loss of key yes - yes

Disable Key after control unit replacement future - future

Enable Key yes - yes

 

yes already implemented in a release version
future some time after next Release
possibly future unsure whether this will be implemented
- not available