Forgot your password?
Document Actions
How to connect the GS-911 interface to your BMW motorcycle
Once your PC software and USB driver are successfully installed and tested, you are ready to use your GS-911. Here is how to connect it to your motorcycle.
- Make sure your interface is the correct side up and the connector ring twisted as far left as possible. Make sure the ignition is OFF at this point and the USB cable preferably not connected to the GS-911 interface at this point.
- Align the receptacle correctly (with the red tab at the bottom), and insert.
- Finally, twist the connector ring as far right as possible, to lock it in place.
- Connect the USB cable, if using USB.
The procedure to disconnect, is the reverse of the above steps.
Copyright (c) HEX Code 2009